Monochrome your Life:
By Innovative Painting
Please enjoy our Ode to Monochrome by browsing through some of our finds in various Department and Online Stores...
(All located within Australia)
Monochrome your Life:
What you will need
For Shade selection, we suggest two colours that contrast well against each other, without taking away from the Chevron design itself. If opting for Brighter shades, only choose one Bright shade, and contrast with a neutral colour. If you like the shade you current space is now, simply choose a shade that works well against it.
For Paint selection, you may choose any type of paint you like and what suits your budget. We suggest Dulux Paints and Matte Paint. Matte Finishes not only look great, but hide imperfections such as small wall cracks and bumps, and can be easily touched up.
Step Two: Lay Your Tape
The next step is the use your tape and mark your chevrons. We recommend laying down the tape with a heavy hand (push down as you're taping), and be sure to make your corners overlap so you can easily trim the excess in the next step. Have the left side of the chevron to be 'above' the grid mark, and the right side be 'below' the grid mark to make your Chevrons look a little taller than they are were wide. What that means is that the intersections of the tape lines (the peaks or valleys of the chevron) were above (peak) or below (valley) the grid marks.
Step Four: Paint over Lines with Base Colour
This step is a little confusing and makes no sense until it's explained. Paint the chevron that will eventually be your accent colour. But paint it with your base colour. You don't have to paint the whole chevron, just use a paint brush and paint over the tape where the tape meets the wall. The base colour will "seap" into the tape where you didn't get a perfect straight line.
Step Five: Paint Accent Colour
After letting the base colour dry, paint your accent colour in the chevron. You may require a second coat, it just depends on the colour you have chosen for your Accent.
The next part is very important: peel off the tape while your accent colour is still wet. If you wait until it's dry, you're going to have a very hard time peeling off the tape as it will be literally painted to the wall. But if you pull the tape off while the accent paint is wet, you will notice that it comes right off! Be careful that you're pulling the tape so that your tension will "cut" the line straight (ie: don't pull "down" or "up" on your wall, try to pull perpendicular to the wall).
Then, wait about 4 hours for the paint to dry and wipe off your chalk with a clean wet cloth.